CARING FOR YOUR WRAP
STORAGE:
It is optimal to park your car in a covered parking spot. Just like paint, vinyl is also affected by UV rays and its color will slowly fade/crack/peel if the car is often exposed to prolonged and direct sunlight. Tree sap, seeds, bird and animal droppings, acid rain, hard water from irrigation (sprinklers), mold and mildew will damage the topcoat of your wrap and potentially void the warranty. Water left standing on a wrap will also create spotting over time.
CLEANING TIPS:
Please note: You should not wax your wrap if it has a matte finish.
We recommend washing once a week, or as needed if sooner.
Waterless Cleaning – Preferred Method: If the vehicle is not overly dirty, this is the best method. Hand wash extremely dirty vehicles first and follow up with a waterless wash. Waterless wash (spray detailer) products will help maintain the gloss level and longevity of the film. Best practice is to test them in an inconspicuous area of the vehicle. We recommend using the standard cleaner in Avery Supreme Wrapping™ Film Care line at graphics.averydennison.com/wraptools.
To provide a protective layer on your wrap for easier cleaning of everyday dirt and stains use a sealant, or a professionally applied ceramic coating.
HAND WASH:
Optimal for a vehicle with dirt or other residue. Follow these steps:
1) Pre-rinse: Using a hose, rinse the vehicle with clean water (hose water is fine) This helps remove the loose dirt particles and helps avoid scratching the material and paint
2) Wash: Gently wash the vehicle with a mild soap & water solution using a soft cloth or clean sponge. Start from the top of the vehicle and work down. Avoid scratching the surface with unnecessary scrubbing
3) Rinse: Rinse thoroughly with clean water.
4) Dry: Let the wrap dry naturally. To avoid water spotting, use a silicone squeegee or chamois (Absorber is our favorite, sold at most auto parts stores) to remove water then finish drying with a micro-fiber or soft, nonabrasive towel.
NOTE! Excessive spraying or pressure at the wrong angle will contribute to creating failure points and result in the wrap lifting at edges. An automatic car wash that uses brushes is not recommended. Brushes will scratch the wrap or catch the wrap’s edge and create a failure point.
EXAMPLES & INDICATIONS OF IMPROPER CARE
FADED FACTORY PARTS
When the factory parts of a vehicle have begun to fade, this is an indication that the car has not been cared for properly. In this case the side mirror with factory black paint has faded. Under this lack of care so would any wrap.
* Not covered under warranty
MOLD GROWTH
In this example of a vehicle with a black roof wrap, there is mold growing on the factory weather strip along with fading. This is a clear indication on improper care.
* Not covered under warranty